Directions: Read entire label before using this product.
Apply only when temperatures are between 50°F and 90°F.
Remove dirt, grease, oil and other contaminants.
Remove blistered or loose paint, and loose rust scale.
Use of rubber gloves is recommended.
Shake and stir well before using.
Pour estimated amount needed into a clean container. Material cannot be returned to original container after use.
For maximum penetration, work product into rusted surfaces with a synthetic bristle brush.
For large areas, use a roller or an airless sprayer.
Apply a 2nd coat soon after the first coat has dried (20-30 minutes). Apply in a cross direction of the 1st coat.
For best results, apply 2 thin coats.
Allow a minimum of 24 hour cure time before painting over with a finish coat.
Clean all painting equipment immediately after use with warm water and mild detergent.
Protect product from freezing in the container.
Store product between 46°F and 82°F.